Understanding Your Roofing System
Before looking for a Roofing contractor Atlanta, it is always best to understand how the roofing system works. You don’t need to go technical about it. A little knowledge on how you’ll go about asking your roofing problems is good enough to find the best deals.
Your roof system is very similar to a fine working machine. It is composed of many different parts that work together simultaneously for a single purpose and this purpose is to protect your home from the potentially harmful outside elements. When one part of the system breaks down it has a direct effect on all of the other parts of the roofing system. The final end result of this would be the roofing system will cease to work at its top performance, and no longer work at its peak efficiency.
The principal parts of the roofing system is the roof covering, which includes the building paper and decking along with the shingles; the flashing that seals the gaps that are around the roof elements; the gutters and downspouts that direct the water away from the roof and the rest of your home; the various vents and the vent covers that consist of the ventilation system; and the soffits and fascia that close in the eave area that improves the overall appearance of the roof.
You can make some easy basic repairs to your roofing system to prevent any further damage to your roof and your homes structure beneath. To fix a problem to your roofing system, you need to first determine why the problem occurred. It would make little sense to take on a repair project before you figure out the problem. Most times than not, moisture is the culprit of the damage to your roof. Moisture can infect your roof system, by the means of failed flashings, clogged gutter and downspouts, and damaged shingle areas. A lot of times it’s very common that it can develop inside the roof due to poor ventilation or it can develop through vapor barrier and insulation problems.
You will need to take immediate action to seal off the leak and to prevent any additional damage from occurring when you discover a leak or discover any other type of a moisture problem. This may have to include tacking a tarp over the area of a shingle problem that has developed, slathering roof cement over an affected problem area of a disconnected flashing, or even simply positioning a bucket under a leak to keep the water from damaging a certain area or any other surfaces or getting into structural areas of your home.
You will need to do some investigating of your roofing system to identify problems and to help you trace any other leaking problems. Once you have discovered why the problem is evident, you will need to correct the problem from getting any worse. After the problem has been identified, you will need to replace any shingles that have been damaged, replace any flashings or any other parts of the roof system that were damaged as a result of the problem.
The best times to inspect any potential problems with your roofing system will be in the season of fall, and in the spring time. It all depends on the size and the shape of your home; you may not even need to get up on the roof to identify a problem or to inspect a future problem in your roofing system. A lot of times, just walking through your home with a pair of binoculars is good enough to inspect your home of potential roofing problems.
By understanding your roofing system and how it works, and being aware of potential problems that may occur, it will make your job of repair much easier. And it would mean a lighter and faster job for a roofing contractor when in case you decide to call for professional assistance.